PN16/235PSI/Class125
Wafer Style
Design to API609 and MSS SP-67
Flange Dimension to EN1092-2, ANSI B16.1 Class 125
| Sealing Performance | |
| EPDM | -20℃-120℃ |
| NBR | -10℃-80℃ |
| VITON | -20℃-150℃ |
| Hydraulic Pressure Test | |
| Body | 2.4Mpa/24Bar |
| Seat | 1.76Mpa/17.6Bar |
HB350-G/O
PN16/235PSI/Class125
Wafer Style
Design to API609 and MSS SP-67
Flange Dimension to EN1092-2, ANSI B16.1 Class 125
| Sealing Performance | |
| EPDM | -20℃-120℃ |
| NBR | -10℃-80℃ |
| VITON | -20℃-150℃ |
| Hydraulic Pressure Test | |
| Body | 2.4Mpa/24Bar |
| Seat | 1.76Mpa/17.6Bar |
| No | Part | Specification | BS EN | AS TM |
| 1 | Body | Stainless Steel | BS970 316 BS970 304 |
CF8M CF8 |
| 2 | Disc | Stainless Steel | BS970 316 BS970 304 |
CF8M CF8 |
| 3 | Seat | EPDM NBR VITON |
EPDM NBR VITON |
EPDM NBR VITON |
| 4 | Shaft | Stainless Steel | BSEN 10088-1 | A582 420 |
| 5 | Bushing | VITON | PTFE | PTFE |
| 6 | SealingRing | Rubber | NBR | NBR |
Suffix - G for operation by worm gear, - O for polished rod
An electric or pneumatic actuator may be mounted to match an ISO5211-based mount.
| mm | 350 | 400 | 450 | 500 | 600 | |
| In | 14 | 16 | 18 | 20 | 24 | |
| L | 79.5 | 90 | 109 | 135 | 157 | |
| H1 | 262 | 302 | 326 | 360 | 444 | |
| H2 | 368 | 400 | 422 | 480 | 562 | |
| H3 | 45 | 51 | 51 | 64 | 70 | |
| D | 333.3 | 389.6 | 439.9 | 491.6 | 592.6 | |
| EN | C | 470 | 525 | 585 | 650 | 770 |
| n-d | 16-27 | 16-30 | 20-30 | 20-33 | 20-36 | |
| AN | C | 476 | 539.5 | 578 | 635 | 749.5 |
| n-d | 12-29 | 16-29 | 16-32 | 20-32 | 20-35 | |
| A | 31.8 | 33.3 | 38 | 41.15 | 50.65 | |
| B | 107.95 | 158.75 | 158.75 | 158.75 | 215.9 | |
| F | 15 | 20.6 | 20.6 | 20.6 | 22.2 | |
Copyright © TALOAR All Rights Reserved
